Holzstar 5902504, Инструкция по эксплуатации

Страница: 14 / 24

14 DKS 504 Vario | Version 1.03
Operation of the Jig Saw
inweise
Notes for sawing
The saw does not cut wood automatically. The user
allows cutting by guiding the wood into the moving saw
blade.
The teeth cut the wood only on the downstroke.
The wood must be slowly guided into the saw blade, as
the teeth of the saw blade are very small.
Every person who wants to work with the saw needs a
certain amount of study time. During this time, some lea-
ves will surely break.
When cutting thicker wood, special care should be taken
not to bend or twist the saw blade. This increases the
service life of the saw blade.
8.1 Workflow
Step 1: Check that the JIG SAW is turned off and the po
-
wer plug is unplugged.
Step 2: Check that all covers and safety devices are pro
-
perly installed.
Step 3: The workpiece on foreign objects such as e.g.
Check nails or screws and remove if necessary.
Step 4: Select saw blade, clamp and check the moving
parts for ease of movement.
Step 5: Adjust the tilt angle if necessary.
Step 6: Adjust the position of the workpiece hold down,
blower and lighting. The blower is preset to direct
the air to the most effective point on the cut line.
Make sure the pressure plate is set to secure the
workpiece and direct air onto the cutting surface.
Fig. 17: Adjust the sawdust blower
Step 7: Connect exhaust (eg vacuum cleaner) to exhaust
and switch on.
Step 8: Switch on the saw by pressing the green START
button (Fig.18).
Fig. 18: ON / OFF Switch
Step 9: Set the desired speed (number of strokes) on the
speed controller - depending on the material to
be cut.Turn the speed selector clockwise to in
-
crease the number of strokes per minute. Turn
the speed selector counterclockwise to de
-
crease the number of strokes per minute.
Fig. 19: Speed control
Step 10: Guide the workpiece against the saw blade.
DANGER!
- Before you start cutting, turn on the saw and hear
the sound that the machine produces. If you notice
strong vibrations or unusual noises, immediately
stop the saw and unplug the power cord.
Wear ear protection!
Wear safety glasses!
Wear respiratory protection!
Wear safety shoes!
Wear protective clothing!
DANGER!
The machine is equipped with a safety switch against
reconnection after voltage drop.