FT1400A
EXO Tool Frame
INSTRUCTION SHEET
1.877.877.2269
BLACKBOX.COM
INSTALLING A CARTRIDGE INTO THE EXO TOOL FRAME
With the EXO Tool Frame unlocked, select the desired (EZ-RJ45 Blue or
EXO-EX Black) cartridge and line up the 2 tabs on the cartridge to the tool
frame opening. Make sure the laser etched writing on the tool is facing
you. Put the cartridge behind the EXO Tool frame opening and push the
cartridge up in the EXO Tool Frame until it snaps into place.
NOTE: If you are left-handed, flip the empty EXO tool frame over and install
the cartridge the same way.
LOCKING AND UNLOCKING THE TOOL FRAME
TO LOCK THE EXO TOOL - Squeeze handles together and hold, pushing
the lock button on the front side all the way through to the back side and
release handles. The tool is now in closed/locked position.
TO UN-LOCK THE EXO TOOL - Squeeze handles together and hold, pushing
the lock button on the back side all the way through to the-front side and
release the handles. The tool will now open.
WHAT’S INCLUDED
• (1) Tool frame
• This manual
LOCK BUTTON
