page 28 Compass
™
Stainer Operator’s Manual
Create a New Program
When the PROG key is pressed, the following information is displayed.
This screen shows the function of different keys for programming a run. The Up and Down arrow
keys move from one step to another, the STOP key allows to exit the programming mode and the
ENTER key accepts the numerical data and moves to the next parameter field. ‘0’ and ‘1’ keys are
used to select NO and YES or Normal and Fast Exit Speed values.
Enter a program number 1 - 15. (Program 1 is pre-loaded and cannot be edited or deleted.) The
system searches for the selected program. The following screen is displayed briefly.
If the selected program already exists (for example ‘3’) the following screen will be displayed.
PRESS 1-9 FOR PROG #
STOP: SAVE AND EXIT
ENTER: ACCEPT VALUE
0: NO, NORMAL SPEED
1: YES, FAST SPEED
Use numbers on keypad to enter program # 1-15
STOP is used to Save and Exit a program
ENTER is used to accept a value
Keys 0 and 1 are used to select options for
criticality, dips, exit speed
CHECKING MEMORY FOR
EXISTING PROGRAMS.
PLEASE WAIT...
