Hofmann geodyna optima, Дополнительные инструкции

Страница: 47 / 62

45
E405
Rear shift scanner zero mark not detected
Possible causes:
•
the flat cable connecting the camera controller
board and the rear shift scanner CCD board is
unplugged, missing or damaged
•
there is a fault in the rear shift scanner CCD
board
•
the rear shift scanner is locked
•
the rear shift scanner zero mark is missing,
bent, locked or damaged
•
the cable connecting the camera controller
board and the rear shift scanner motor is
unplugged, damaged or missing
•
there is a fault in the motor power supply board
•
there is a fault in the rear shift scanner motor
•
there is a fault in the camera controller board
motor drivers
Corrective actions:
•
check all items above.
E406
Rear
shift motor missing steps
Possible causes:
•
the rear shift scanner movement is not smooth
or it is striking the frame
•
the motor power supply is not configured
properly
• there is a fault in the motor power supply board
• there is a fault in the rear shift scanner motor
• there is a fault in the camera controller board
motor drivers
• the cable connecting the camera controller
board and the rear shift scanner motor is
partially unplugged or damaged
Corrective actions:
•
check all items above.