Hofmann geodyna optima Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 62

Hofmann geodyna optima Скачать руководство пользователя страница 25

23

11.0-1

11.0-2

A

11.0 Optional functions

The wheel balancer has additional functions, which can
be enabled individually after purchasing the machine.
They are enabled by plugging a software key (fig. 11.0-
1) into one of the USB ports on the back of the machine
(fig. 11.0-2).

Each USB key acts exclusively as an enabling device
and its presence on the machine is essential in order
to use the Optional Functions. The USB key must
remain plugged in constantly until the cycle of the
Function it enables is complete.

You can plug in the key at any moment. The program
recognises the key immediately and the Optional
Function is instantly made available, without the
operator having to perform any other procedures.

The key can also be removed at any moment, disabling
any Optional Functions.

THE OPTIONAL FUNCTIONS ARE ONLY ACTIVE
WHEN THE USB KEY IS PLUGGED INTO THE
MACHINE'S USB PORT.
AS SOON AS THE KEY IS REMOVED FROM THE
USB PORT THE OPTIONAL FUNCTIONS ARE NO
LONGER AVAILABLE ON THE MACHINE.

How to use the key

:

• Plug the key into one of the USB ports, shown by the

yellow sticker (

A

fig. 11.0-2), on the back of the

machine.

Keep the key by leaving it plugged into the machine's
USB port.

«
...
23
24
25
26
27
...
»

Содержание geodyna optima































































Отзывы:

Нет отзывов