1.
INTRODUCTION
Thank you for purchasing our products.
A3 Super 3 (hereinafter referred to as A3S3) is a high-performance and functional 6-axis gyro and
stabilizer designed for R/C airplanes. This gyro can be used with nearly any size and type of R/C airplanes
and it will make the flying even easier and comfortable.
Features
1. 32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware
solution provide more reliable performance.
2. 6 flight modes, including Gyro-Off mode, Normal mode, Trainer mode, Atti-Lock mode, Auto-Level
mode and Auto-Hover mode.
3. 6-position flight mode switching supported.
4. Compatible with most standard receivers, standard PPM single-line receivers and Futaba’s S.Bus
and S.Bus 2 receivers.
5. 7 wing types, dual aileron, dual elevator, delta-wing and v-tail supported.
6. External LED module, integrated with data interface, flat or upright various mounting orientations
supported.
7. Sub trim and travel limit settings for servos, separate stick Rate and EXP settings for each mode.
8. Pass-through function for [A2] and [E2] channels.
9. Customizable hardware and software low pass filters for gyroscope and accelerometer, enable you to
optimize the performance of the gyro as you wish.
10. Quick setup supported by using the programming card while flying outside.
Thank you for your confidence and wish you fun and great flights with A3S3!
WWW.HOBBYEAGLE.COM
