AUTO-HOVER MODE
Fast Flashing Violet
The Auto-Hover mode provides the same functionality as the Auto-Level mode. The only difference is that when you
release the sticks, the plane will be brought to vertical position (nose up) and keeps hovering. This flight mode is designed
to help you to learn hovering maneuver and reduce the probability of crashing.
5.1.
3-POSITION MODE SWITCHING
Usually any one of the 3-position toggle switches on your transmitter can be used to switch the flight mode. Sometimes you
can use gear or flap channel directly. In order to read three states from the input signal, the pulse length of the input signal
must meet the requirement of range as shown below. The flight mode associated to each position can be preset in the
software or program card.
5.2.
6-POSITION MODE SWITCHING
A3S3 also supports 6-position flight mode switching, which allows you switch among all 6 flight modes during flight. To do
this, you need to program a mixing function with one 2-position and one 3-position switch on your transmitter. To read six
states from the input signal correctly, the pulse length of the input signal must meet the requirement of range as shown
below.
To enable a 6-position logic switch, advanced programmable mixing functions should be supported by your transmitter. We
will provide some examples for you to show how to program the mixing on some common radios on our website.
6.
GYRO DIRECTION
It’s extremely important to make sure that the gyro reacts in the correct direction for each channel
before flight. An opposite reaction of the gyro could lead to losing control or even crash!
