9.2.
OVERVIEW OF THE SOFTWARE
Double-click the icon on your desktop to run the software, you will get the following GUI.
[1] Main Menu
Click the icon on the top-left corner will pop up a menu that contains the most commonly used functions. You can
change the language between English, Simplified Chinese and Traditional Chinese in the menu, after change the
language, you need to restart the software to make the new language take effect.
[2] Port List
Click to reload the available port list. Click the arrow to open the post list and select your port. The icon
means that
the port has been opened successfully. If you get a greyed icon like
you will need to verify that you have inserted
the USB adapter and installed the USB driver successfully.
[3] System Information
Display the system information of the gyro, including the system state, current flight mode, master gain and the RX
status of each input channel.
[4] Device Information
After successful reading, the current firmware version and data version will be displayed here.
[5] Read
Click this button to read the config data from the gyro.
[6] Write
After you have changed the configuration, click this button to send the changes to the gyro and save.
[7] Exit
Exit the application
[8] Setting Functions
All available setting functions are grouped and listed here.
[1]
[2]
[3]
[4]
[5]
[6]
[8]
[7]
