(6) Now mount the engine to the fuselage Use (4) 4mmx15mm screws with the
(4) 4mm washers. Be sure to use screw locking compound on the threads.
(2) Put the self tapping screw in the center hole from the large end and tighten it
only a couple of turns.
FUEL TANK INSTALLATION
(A) Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(B) Clunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(C) Silicone Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(D) Fuel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 (1 extra)
(E) Plastic Disc (Large) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(F) Plastic Disc (Small) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(G) 3mmx 18mm Self Tapping Screw. . . . . . . . . . . . . . . . . . . . . . . . .1
(H) Rubber Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(I) Neoprene Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(J) Balsa Tank Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
(3) Attach the silicone tubing to the centered fuel pipe and attach the clunk to the
other end.
(1) Install two fuel pipes through the rubber plug. One should be halfway through,
the other should be 2/3 through as shown. Next place the two plastic discs
onto each side. The large one should be on the outside.
(4) Carefully bend up the other fuel pipe so it will just touch the inside top of the
fuel tank.
-11-
