(5) Attach the complete fuel tank cap to the tank Make sure that the bent pipe is
pointing to the top Slide the cap on until the lip on the fuel tank is in the
groove of the cap. Then tighten the screw.
(8) Install the fuel tank from the inside of the fuselage with the fuel lines facing
front Slide the tank into its mount and up into the hole in front of the fuselage
Make sure that the fuel tubing is through the hole.
(6) Glue the neoprene ring to the tank with silicone sealer Attach two pieces of
fuel tubing (6" each) to the pipes. One is for the carburetor the other is for the
pressure tap on the muffler
(9) Epoxy the tank support to the inside of the front fuselage Once dry apply a
heavy bead of silicone sealer in between the support and the tank.
RADIO INSTALLATION
(A) Aileron Horn . . . . . . . . . 2
(B) Wood Push Rods . . . . . . . . 2
(C) Aileron Control Rods (Short) . . . 2
(D) Control Rod (Long) . . . . 3
(E) Control Rod (Short-Bent) . . . . 2
(F) Shrink Tubing . . . . . . . . . . 1
(G) Throttle Control Rod (Long) . . . 1
(H) Snap Clevis . . . . . 2
(I) Push Rod Exits . . . . . . . . 3
(J) Clevis Retainer Tubing . . . . . . 1
(K) Throttle Tube . . . . . . . . . . 1
(7) Put a bead of silicone sealer on the top of the neoprene ring.
-12-
