Caution
◎
Do not hold moving parts of the product or its
cables during installation. It may result in injury.
◎
Do not insert a finger or object in the openings in
the product. It may cause fire, electric shock, or
injury.
◎
The motor generates a large amount of heat
during operation, and the product surface
temperature is high. Ensure this will not affect a
workpiece near the gripper.
◎
The actuator cables with the product are flexible,
but do not store the cables in a movable cable
duct that bends more than the specified bending
radius. (Rb
≥
63mm )
◎
Do not scratch the actuator cables. Please
perform periodic inspections monthly. Scratching,
forcible bending, straining, winding, and pinching
may cause short circuit and insulation failure,
which results in electric shock and malfunction.
◎
When the product is unusable and scrapped,
please follow the local waste disposal regulations
for handling.
◎
When using this product, please wear safety
shoes or the related protective equipment.
◎
The mounting face has holes and slots for
positioning. Make use of them if necessary.
◎
Design the jaws to be lightweight and minimum
length.
◎
Mass of a workpiece that the jaws can grip
greatly differs depending on the material quality,
shape, and gripping surface condition of the jaws.
◎
Use speed and parameters appropriate with the
product to avoid making a great impact to the
jaws.
◎
Please assure there is sufficient space for
maintenance and inspection, and perform
regular maintenance every six (6) months or after
activating the product 500,000 times.
◎
Please perform maintenance of transmission
components in manual mode. After adjusting the
gripper to the maximum opening position, please
use the greasing device to replenish the grease
or apply the grease on the screw shaft and both
sides of groove.
◎
The measured result of actual noise level for
product is 61.2 dB. (Conditions: distance from
the product is 1 meter, height from the ground is
1.6 meters, maximum speed is 80% operating). If
the noise level is over 80dB(A) during operation,
personal protective equipment is required.
1.2 Warning Sign Location & Description
The warning sign shown below will be on the product to ensure the proper and safe operation.
Danger for Hand Injury
Please do not Insert Hand
C02UE03-2007
3
