Operation—Operating The Machine
TX14740,0001FA7
–19–21MAY07–3/3
T158365
–UN–06AUG02
1—Cold Weather Start Aid Switch—Side Entry
Cab
Cold Weather Starting Aid
IMPORTANT: Prevent damage to engine. Use starting
aid when temperatures are below -1
°
C
(30
°
F) and only when engine is COLD.
IMPORTANT: Excess starting fluid could damage
engine; push starting aid button only
when engine is cold and cracking.
Starting aid fluid is being injected into
engine as long as you push switch.
1. Turn key switch clockwise to START position.
2. After one or two revolutions of engine crankshaft, push
start aid switch (1) at short intervals. Crank engine for
20 seconds maximum, then allow 2 minutes between
cranking periods.
Warming The Engine
1. Run engine at 1/3 speed for 30 seconds. Do not run
engine at fast or slow idle. Do not accelerate rapidly
during warm-up.
2. Operate machine at less-than-normal loads and
speeds until engine is at normal operating temperature.
2-2-3
081407
PN=56
Содержание Zaxis 200LC
