Hitachi Zaxis 200LC, Руководство оператора

Страница: 108 / 255

Maintenance—Periodic Maintenance
OUT4001,0000274 –19–13AUG07–1/5
Maintenance and Repair Record Keeping
System
SERVICE INTERVALS
Service your machine at intervals shown on this chart. Also, perform service on items at multiples of the original requirement. For example, at
500 hours also service those items (if applicable) listed under 250 hours, 100 hours, 50 hours, and 10 hours or daily.
As Required
•
Clean fuel tank inlet screen
•
Check and adjust track sag
•
Drain fuel tank sump
•
Vent hydraulic oil tank pressure
•
Clean radiator air inlet screens
•
Check windshield washer fluid level
•
Drain water separator
•
Check hydraulic oil level in cab tilt power pack
•
Check air cleaner dust valve
•
Check oil cooler debris screen (Zaxis 200LC, Zaxis 250)
Every 10 Hours or Daily
•
Check engine oil level
•
Check hydraulic tank oil level
•
Check recovery tank coolant level
•
Grease working tool pivots
Every 50 Hours
•
Grease swing bearing
After First 50 Hours
•
Check track shoe cap screw torque (Track shoes should be inspected and re-torqued at an initial 50 hours and at 250-hour intervals
thereafter.)
REQUIRED PARTS
Insure machine performance and availability; use only genuine Hitachi parts. Verify part numbers are current and that any associated parts
are also on hand, i.e., filter O-rings.
Continued on next page
3-2-5
081407
PN=104