33
Inner lid
Plate
Grooves
Moisture trap
Caution
●
Wait for the inner lid to cool before
removing it.
●
Wait for the plate to cool before removing it.
(Hot water could drip from it.)
●
Do not touch hot components,
such as the inner pot, inner lid, or
plate during or immediately after
use.
●
Pressing it again will switch back to the original
mode.
In this case, “ ” is displayed.
Press
.
1
3
4
P.26
Inner lid
Plate
How to switch to plate condensation reduction mode immediately after cooking
Non-water supply auto steamer
●
Condensation collects on the inner lid and other plate immediately after cooking to keep the surface of the rice
from drying. If the condensation concerns you, increase the steaming time and switch to a mode that reduces the
condensation. Once the mode is switched, the setting is remembered until you switch back to the original mode.
●
The menu that was selected
last time flashes and the time
that was set lights up.
Press
to make “Variety”
flash.
The switch over is completed when
the buzzer sounds and “ ” is
displayed for 2 seconds.
Continue pressing for 5
seconds.
When switching to a
mode that reduces
the condensation
●
Approximately 5 more minutes
will be required for cooking.
●
It will reduce the amount of
water that collects in the plate.
●
The rice cooker is pressurized
and has strong seal, so there
will be some condensation
even when switching to a mode
that reduces the condensation.
Select "Warm Hi" if
condensation during Keep
Warm is a concern.
Flashes
The non-water supply auto steamer collects the steam during cooking as distilled water and emits it as steam during
cooking, warming, and reheating to bring out the taste of the rice and keep it moist. (There is no need to add water.)
Contact
prohibited
Flashes
Lights up
Содержание RZ-W3000YH
Страница 1: ...㻭 䠒 ...
Страница 56: ...A 6 ...