Hitachi PC-ARFP1E, Инструкция по установке и эксплуатации

Страница: 58 / 776

8.8 COMFORT SETTING
This function is used to control cooling of the discharged air
when in the cooling mode.
?
N O T E
• The indoor unit cannot be set when the function is not supported.
• The cool air level order is as follows: “HIGH” > “MED” > “LOW” and
the temperature of the discharged air is high.
• It is possible the operation may not function if there are more than two
units operating.
• When this function is set, it may take time for the entire room to cool
down.
1 Select “Comfort Setting” from the “Menu” screen and press
“OK”. The “Comfort Setting” screen will be displayed.
Menu
Function 10
Sav/reduction Schedule
Comfort Setting
Quick Function 02
/
05
Operation Noise Reduction
15:10(Fri)
Entr Rtrn Sel. OK
OK
? /
OK
? /
2 By pressing “ ” or “ ” the Comfort Setting Mode will
change as follows : OFF ↔ LOW ↔ MED ↔ HIGH
Select the “Control Cool Air” level and press “OK”.
OK
Comfort Setting
Control Cool Air OFF
Entr Rtrn Adj.
OK
?
/
OK
? /
3 The setting confirmation screen will be displayed. Select
“Yes” with “
” or “ ” and press “OK” to confirm the setting.
The screen will return to normal mode.
OK
Comfort Setting
Yes No
Sel. Entr Rtrn
Set comfort setting?
OK
? /
OK
?
/
8.9 POWER SAVING / OPERATION NOISE REDUCTION SCHEDULE
This function is used to start or stop power saving (capacity
control or intermittent control) or noise reduction modes at the
desired time. Up to five daily schedules can be set for power
saving or operation noise reduction.
The detailed settings for each of the modes available for
scheduled activation are carried out at their corresponding setup
menus.
?
N O T E
Set time zones so they don’t overlap during a day when managing multiple
schedule patterns as in Example 1 below. If time zones are overlapped
as in Example 2, the first “OFF Time” (14:00 in the example 2) will be
cancelled.
8.9.1 Example of power saving operation and
schedule setting
MED
LOW
HIGH
OFF
ON
08:00 10:00 12:00 14:00 16:00 18:00
1 2 3 4 5
Example of Power Saving Schedule Operation
• Example 1:
CORRECT
OK
Capacity Control (Mon)
1
2
3
4
5
15:10(Fri)
Entr Rtrn Sel. Adj.
LOW
MED
MED
HIGH
08:00 10:00
10:00
12:00
14:00
16:00
12:00
14:00
16:00
18:00 LOW
• Example 2:
INCORRECT
OK
Capacity Control (Mon)
1
2
3
4
5
15:10(Fri)
Entr Rtrn Sel. Adj.
LOW
MED
HIGH
08:00 18:00
10:00
12:00
16:00
14:00
MENU OPERATION
PMML0496 rev.1 - 12/2020 50