ENGLISH
5 POWER SAVING GUIDE
This function easily sets the power-saving feature.
Depending on the type and setting of the indoor unit and outdoor
unit it may be impossible to set this function.
?
N O T E
: Unable to set: If a function displaying “ ” is selected from the “Menu”,
“No Function” will be displayed on the lower screen.
1
Press
“ECO”: The Power Save Guide will be displayed as
shown in the image near the bottom of this page.
A/C
MODE SPEED
TEMP
COOL
SPEED
ADJ
Meeting Room
OK
?
/
2
The current setting status is displayed for “Power Saving
Mode”, “Power Saving ON/OFF”, “Power Saving Level” and
“Schedule”. It is possible to change the “Sav ON/OFF” and
“Sav Level” settings. (*1).
•
Power Saving ON/OFF Setting:
Press “ ” or “
” and select “SAV ON/OFF”. By pressing “
”
or “
”, the setting will change between “ON” ↔ “OFF”. (*2)
•
Power Saving Level:
Depends on the configuration selected in “Change level”
of the
“8.5.3 Power saving detailed setting (Intermittent operation
control)”
menu.
Press “ ” or “
” and select “Sav Level”. By pressing “
”
or “
” the setting will change between “LOW” ↔ “MED” ↔
“HIGH”. (*2) (*3)
A/C
MODE SPEED
TEMP
COOL
Meeting Room
SPEED
ADJ
Sav:HIG
Power Save Guide
Sav Mode
Capacity Cntl
Sav ON/OFF
ON
Sav Level
HIGH
RTN.
Schedule
No Setting
Detailed Setting
SEL.
ADJ
OK
?
/
?
/
OK
OK
?
/
The icon “Sav: HIG/MED/LOW” is
displayed when “Power Saving” is
ON in COOL,HEAT and DRY modes
?
N O T E
• *1: When the Power Saving Mode is “Rotation Control”, the “Power
Saving Level” and “Schedule” are not displayed. When the Power
Saving Mode is “No Setting”, the “Power Saving ON/OFF”, “Power
Saving Level” and “Schedule” are not displayed.
• *2: When the Power Sav Mode is “Capacity Control” and Remote
controller is set as SUB, it is not possible to change the settings for
“Power Saving ON/OFF” and “Power Saving Level”.
• *3: When Power Saving is OFF, the “Power Saving Level” cannot be
changed.
•
Detailed Setting:
Press “ ” or “ ” and select “Detailed Setting”. By pressing
“OK”, the Detailed Setting screen will be displayed.
3
Press “ ” or “ ” and select the setting function. By pressing
“OK”, each type of setting will be displayed.
Refer to the following concerning each setting.
• Power Saving Mode Setting (Section
“8.5 Power saving”
”)
•
Detailed Setting (Section
“8.5 Power saving”
)
•
Schedule (Section
“8.9 Power Saving / Operation Noise Reduction
Schedule”
).
OK
?
/
OK
?
/
Detailed Setting
Schedule
Detailed Setting
Power Saving Mode Setting
Change power saving mode used.
RTN.
SEL.
OK
ENT.
POWER SAVING GUIDE
PMML0496 rev.1 - 12/2020
7
