Hitachi LM-C300 Series Скачать руководство пользователя страница 82

Страница: 82 / 85

- 82 -

CODE

FAULT

CAUSE

SOLUTION

0x34

License not valid

1. There is no internal barcode license

and the message contains some
variable barcode data.

1. Activate the barcode license to be

used.

0x36

Multiple
triggersignal

The parameter value set in “Trigger”

is not correct.

2. The space between products is too

narrow.

3. The photocell signal is chattering.

Readjust the “Trigger” set value.

2. Reduce the conveyer speed.
3. Increase the space between products.
4. Change the photocell type.
5. Change the position of the photocell.
6. In order to avoid vibrations during

product movement, improve the
installation at the customer site.

0x37 Error in Database

1. The database does not exist.

1. Send the corresponding file to the

database.

0x38 Distance alarm

1. The distance between workpieces is

smaller than the minimum distance
which is set.

1. Increase the maximum distance set

value or reduce the distance between
workpieces on the production line from
the current state.

0x39

Min. distance not
reached

1. The distance between workpieces is

smaller than the minimum distance
which is set.

1. Reduce the minimum distance set

value or increase the distance between
workpieces on the production line from
the current state.

0x40

CUSTOMER TIME
OUT

1. The network connectors and/or the

cable is not connected properly.

2. There is a problem with the network

board.

1. Click "Start"-> "Run" on the Windows

toolbar and enter the following
commands to "ping (check network
communication)" the laser:
ping 192.168.0.180
Port 3490

2. If you cannot receive a response, there

is a problem with the connection to the
laser. Check the cable and the
connectors.

3. Make sure that the network board is

installed correctly. Check the properties
of the TCP / IP protocol.

0x41 Failure Scanner X

The item “Alarms”

> “Alarm on

scanner failure” is enabled.

Disable the item “Alarms”

> “Alarm on

scanner failure”.

0x42 Failure Scanner Y

The item “Alarms”

> “Alarm on

scanner failure” is enabled.

Disable the item “Alarms”

> “Alarm on

scanner failure”.

0x43 Empty file

1. The message loaded and sent for

printing does not contain any content.

2. The message field to be printed is

empty.

3. You are trying to print an internal user

message with an empty string.

4. The communication buffer for the

user message is empty.

1. Enter the message to enable marking.
2. Make sure that the field of the

message to be printed is not empty.

3. Make sure that the internal user

message is not an empty string.

4. Transmit the new next data and buffer

it.

0x44

Initialization failed

1. Hardware configuration does not

match software configuration.

2. The scan card was not detected by

scanlinux.

3. The firmware tried to initialize the

Laser Marker but failed.

1. Make sure that the laser system

settings are correct and that all
configuration parameters are set.
(For laser type, select CO2 and type1
for 10W, and CO2 and type2 for
30W.)

2. Check that the scanner board is

connected correctly.

3. Restart the laser system.

Содержание LM-C300 Series






















































































Результаты поиска

Содержание LM-C300 Series

Отзывы:

Похожие инструкции для LM-C300 Series

Бренды по названию

Популярные бренды

Hitachi LM-C300 Series, Руководство пользователя

Результаты поиска

Содержание LM-C300 Series

Отзывы:

Похожие инструкции для LM-C300 Series

Бренды по названию

Популярные бренды