Hitachi LM-C300 Series Скачать руководство пользователя страница 55

Страница: 55 / 85

- 55 -

3.9.3. ACCESSING THE FIELD EDITING MENU

Access to these menus is different for Touch Screen and Laser Application.

There are mainly five menus for field editing menus as follows:

- GENERAL: Change the field position

- TRANS. : Change the field angle

- TEXT : Change the text field position and orientation

- FONT/1 : Change text dimensions etc.

- FONT/2 : Change text alignment, rotation, etc.

Touch Screen:

To access the field editing menu using the Touch Screen, follow the procedure below.

(1) Select "FILE" on the main screen.

(2) Select "LOAD" on the right side of the screen.

(3) Select the message you want to edit from the list of existing messages displayed on the left side

of the screen.

(4) Press "EDIT" displayed in the lower left of the screen, and press the field you want to edit from

the fields displayed in the working area on the right of the screen.

(5) The field editing menu (GENERAL, TRANS., TEXT, FONT/1, Font/2, etc. selection screen) is

displayed on the left side of the screen.

(6) Select the menu that corresponds to the item you want to edit and change the setting value.

(7) Press "RETURN" and press "FILE" displayed at the bottom left of the screen to save the changed

settings. Refer to "3.2.3 SAVING YOUR MESSAGE" for details on saving.

[NOTE]

After pressing "EDIT" in step (4), select the field you want to edit from the list of fields

displayed on the upper left of the screen, and the field edit menu can be displayed directly.

[NOTE 2]

The screen differs depending on the software version. For example, this screen

may look like the one on the right side figure above.

[NOTE 1]

If you slide the icons to the left, icons that are not

on this screen will be displayed.

Содержание LM-C300 Series






















































































Результаты поиска

Содержание LM-C300 Series

Отзывы:

Похожие инструкции для LM-C300 Series

Бренды по названию

Популярные бренды

Hitachi LM-C300 Series, Руководство пользователя

Результаты поиска

Содержание LM-C300 Series

Отзывы:

Похожие инструкции для LM-C300 Series

Бренды по названию

Популярные бренды