74
5. Messenger Function
5. Messenger Function (Continued)
Configure the following items from a web browser when Messenger function is
used.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter
"http://192.168.1.10/"
into the address bar of the web browser.
2) Enter your user name and password, and then
click the
[OK]
.
3) Click the
[Port Settings]
on the main menu.
4) Click the
[Enable]
check box to open the
Messenger Port (Port: 9719)
. Click the
[Enable]
check box for the
[Authentication]
setting when authentication is required,
otherwise clear the check box.
5) Click the
[Apply]
button to save the settings.
When the authentication setting is enabled, the following settings are required.
6) Click the
[Security Settings]
on the main menu.
7) Select the
[Network Control]
and enter the desired authentication password.
8) Click the
[Apply]
button to save the settings.
• The Authentication Password will be the same for
Network Control
Port1 (Port: 23)
,
Network Control Port2 (Port: 9715)
,
PJLink™ Port (Port:
4352)
,
My Image Port (Port: 9716)
and
Messenger Port (Port: 9719)
.
• The new configuration settings are activated after restarting the network
connection. When the configuration settings are changed, you must restart the
network connection. You can restart the network connection by clicking the
[Network Restart]
on the main menu.
NOTE
