Hitachi 3080 G2, Справочник по аппаратуре

Страница: 58 / 129

Terminal Requirement
Parity None
Flow control None
Note: Once the initial setup has been completed, disconnect the serial cable.
If you need to manage the server through a serial connection, connect to the
serial port on the external SMU and use SSH to access the server's CLI. If
your system does not include an external SMU, connect to the server’s
internal SMU and use SSH to access the server's CLI.
10/100/1000 Ethernet management ports
The 10/100/1000 Ethernet management ports are used to connect the server
or node to the customer facing management network and the private
management network, or to connect directly to another device for
management purposes.
The 10/100/1000 Ethernet ports operate at speeds of up to one (1) gigabit
per second, and require the use of a standard RJ45 cable connector. Once
connected, each GE port has two indicator LEDs; one on the top left and the
second on the top right of the port. These LEDs provide link status and
network activity status information as described in the next table:
Ethernet cables
The HNAS 3080 and 3090 models require CAT6 cables that fully comply with
the CAT6 SF/UTP standard for the 1000Base-T GE Ethernet network ports.
Always use CAT6 cables that fully comply, such as those supplied by Harting.
See the following examples of Harting cables that comply with the standard:
Cable Part number
CABLE ETHERNET PATCH LEAD CAT6 SF/UTP 1 Meter HARTING 09474747109
CABLE ETHERNET PATCH LEAD CAT6 SF/UTP 2 Meter HARTING 09474747111
CABLE ETHERNET PATCH LEAD CAT6 SF/UTP 3 Meter HARTING 09474747113
CABLE ETHERNET PATCH LEAD CAT6 SF/UTP 5 Meter HARTING 09474747115
CABLE ETHERNET PATCH LEAD CAT6 SF/UTP 10 Meter HARTING 09474747121
58 Hitachi NAS Platform server components
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide