Hitachi 3080 G2, Справочник по аппаратуре

Страница: 93 / 129

4. Navigate to Home > Server Settings > Firmware Package
Management to verify the existing server (SU) firmware release level.
5. Navigate to Home > Server Settings > License Keys to check the
license keys to ensure you have the correct set of new license keys.
Shutting down the server you are replacing
On the server that you are replacing:
Procedure
1. From the server console, issue the command:
shutdown --ship --
powerdown
Wait until the console displays
Information: Server has shut down
,
and the rear panel LEDs turn off. The PSU and server fans continue to
run until you remove the power cables from the PSU module. See the
appropriate system component section for more information.
Note: This specific
powerdown
command prepares the system for both
shipping, and potential long-term, post-replacement storage.
2. Unplug the power cords from the power supplies.
3. Wait approximately 15 seconds, and then confirm the NVRAM status LED
is off.
If the LED is flashing or fixed, press and hold the
reset button for five
seconds until the LED starts flashing. The battery disables when you
release the
reset button.
Server replacement procedures 93
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide