Configuration Setup
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: [email protected] · www.hirschmann.com
20
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
4.2
Quick adjusting the reeving
It is necessary to program the system by entering the respective number of reevings each time the
rope reeving arrangement is modified.
Calling up the function:
Actuate
"SEL"
key
The system will temporarily interrupt the movements of the crane during the
setup procedure.
•
Start setup procedure
Note: Start of setup reeving procedure is not possible with man masket
operation!
Setup reeving
START
configuration setup procedure
OK
, only if all entries are correct
The entering of the mode of operation code is completed after this confirmation,
and the normal operation screen is displayed.
•
Select
reeving:
(not with man basket operation)
Increase value
Decrease value
Confirm reeving