Working area definition
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: [email protected] · www.hirschmann.com
27
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
4.4.3 Boom angle monitoring
Programmable function to monitor the
upper and / or lower boom angle
Calling up the function
Overview menu with symbols appears, with any previously programmed
limits.
edit radius limit
edit height limit
edit boom angle limit
Go to next key level
save current boom position as upper angle limit
(the last saved value for the upper boom angle is displayed)
switch monitoring of upper boom angle on / off
(having switched on, the relevant symbol appears near the limit value and in the
status display)
jump to settings of lower boom angle
back to limits main menu
save current boom position as upper angle limit
(the last saved value for the upper boom angle is displayed)
switch monitoring of upper boom angle on / off
(having switched on, the relevant symbol appears near the limit value and in the
status display)
jump to settings of lower boom angle
back to limits main menu
The settings for programming the
lower boom angle
are similar!