Configuration Setup
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: [email protected] · www.hirschmann.com
17
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
•
Select boom with or without jib:
1=main boom 2=Main boom with jib
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
•
Select
jib
length:
(if jib operation was selected)
1=short jib 2=long jib
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
•
Select jib offset angle:
1=offset 1 2=offset 2 3=offset 3
Cursor to next position
Cursor to previous position
Confirm selection, go to next step