Hioki LR8431, Инструкция по эксплуатации

Страница: 128 / 204

8.1 Screen and Key Operation Settings
120
If a power outage or other power loss causes an interruption in recording (while the
LED on the left side of the
START/STOP key is lit), you can automatically resume
recording when the power is restored. If you are using triggers, the triggers are
restored to the [Waiting for trigger] state.
Backlight brightness can be selected from four levels. Lower brightness settings pro-
vide longer battery operating time.
8.1 Screen and Key Operation Settings
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions.
1
2
Select the [System]
Screen.
Using the Auto-Resume Function

(Resume After Power Restoration)
Bear in mind that data on the CF card or USB flash drive can be lost
if power is disrupted while writing to it.
Adjust Backlight Brightness
Select from the [Start Backup] setting options.
Setting options:(

default setting)
Off

Do not use the Auto-Resume Function.
On Use the Auto-Resume Function.
When the
[Backlight Brightness]
setting is
selected, pressing the
ENTER
key repeated cycles
through the four brightness levels.
Setting options: 100%

,

70%, 40%, 25%

(four-step
brightness setting) (

default setting)