manualshive.com logo in svg

Hioki BT3564, Инструкция по эксплуатации, Страница: 102 / 210

Поделиться
Скачать
Hioki BT3564 Скачать руководство пользователя страница 102

8.1  Overview and Features

96

All instrument functions other than power on/off switching can be controlled via
GP-IB/RS-232C interfaces.
• Resetting is supported.

• IEEE 488.2-1987 Common (essential) Commands are supported.
• Complies with the following standard:

Applicable standard    IEEE 488.1-1987

*1

• This instrument is designed with reference to the following standard:

Reference standard    IEEE 488.2-1987

*2

• If the output queue becomes full, a query error is generated and the output

queue is cleared. Therefore, clearing the output queue and query error output
from the deadlocked condition

*3

 as defined in IEEE 488.2 is not supported.

8.1 Overview and Features

*1. ANSI/IEEE Standard 488.1-1987, IEEE Standard Digital Interface for

Programmable Instrumentation.

*2. ANSI/IEEE Standard 488.2-1987, IEEE Standard Codes, Formats,

Protocols, and Common Commands.

*3. The situation in which the input buffer and the output queue become full, so

that processing cannot continue.

HIOKI BT3564A961-02

Содержание BT3564



















































































































































































































Отзывы:

Нет отзывов