Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Страница: 88 / 108

6.8.4 I
NSTALLING RUBBER TRACKS
1. Before installing the rubber tracks, make sure that
you are always in safe conditions with the machine
suspended from the ground, as indicated in the pre‐
vious paragraph.
2. Check that the grease contained in the hydraulic cylinder has been removed.
3. Mesh the track links with the track teeth
of sprocket wheel and place the other end
of the track on the idler.
4. Rotate the drive wheel to reverse slowly
(7) pushing into the frame.
If necessary, help yourself with a pry bar
(8), especially to “walk” the first teeth in
past the idler.
5. Make sure that the track links are pro‐
perly meshed in the sprocket and idler.
6. Adjust the track tensioning (see paragraph No. 6.5.2 “ Tensioning rubber tracks ”).
7. Lower the dumper down to the ground.
6.9 TIGHTENING BOLTS AND NUTS
An essential part of the dumper maintenance is to check bolts, nuts and parts in
general that may be subject to loosening.
Pay particular attention to frame components such as idlers, gear motors, drive
wheels and tracks. Check that they are sufficiently tightened according to the fol‐
lowing table.
Thread diameter Pitch kgf
•
m
mm mm
6 1 1,3 ± 0,15
8 1,25 3,2 ± 0,3
10 1,5 6,5 ± 0,6
12 1,75 11 ± 1
14 2 17,5 ± 2
16 2 27 ± 3
18 2,5 37 ± 4
20 2,5 53 ± 6
22 2,5 73 ± 8
24 3 92 ± 10
27 3 135 ± 15
30 3,5 184 ± 20
C
OMPACT DUMPER
HS701 ‐ H
INOWA
86
MUHS70120615
8
7
5202
02B
H19
PERICOLO
DANGER