manualshive.com logo in svg

Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Поделиться
Скачать
Hinowa HS701 Скачать руководство пользователя страница 71

6.3.2 F

UEL FILTER MAINTENANCE

Before replacing the filter, you must let the engine cool down. Every trace of oil spil‐
led during filter replacement must be accurately cleaned to prevent slipping and acci‐
dents.

The fuel must be disposed of in accordance with current laws and regulations. Do
not pour it on the ground or into a drain. The fuel filter must be disposed of in
accordance with current laws and regulations.

• Cleaning Fuel Filter

‐  Empty the fuel tank and disconnect
the fuel pipe.
‐  Loosen the ring nut and take out the
filter (1).
‐ Wash the filter clean off impurities
with fresh fuel.
‐  Take much care when handling the
element because it is very fragile.

If the element should have holes, replace it with a new one. A damaged element
will shorten the service life of the nozzle and injection pump

.

• Changing Fuel Filter

‐  Empty the fuel tank and disconnect
the fuel pipe.
‐  Loosen the ring nut and take out the
filter (1).
‐  Replace the filter (1).
‐  Take much care when handling the
element because it is very fragile.

A damaged element will shorten the service life of the nozzle and injection pump.

69

C

OMPACT DUMPER

HS701 ‐ H

INOWA

MUHS70120615

PERICOLO

DANGER

ATTENZIONE

CAUTION

ATTENZIONE

CAUTION

ATTENZIONE

CAUTION

Содержание HS701













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды