Hinowa HS701 Скачать руководство пользователя страница 70

Страница: 70 / 108

6.3.1 R

EFUELLING FUEL

The fuel is flammable and it’s may be danger. Use with great attention.

For avoid personal injuri:
• Not be mixing the diesel fuel with gasoline or alcohol. This mix can cause explo‐

sion.

• Pay attention, don’t spill the fuel during the refuelling. If it should happen, clean

it immediatly for avoid possible burn.

• Don’t forgotten of stop the engine before refuelling of fuel. Keep away from the

fire the engine.

• Verify that the engine is refilling when perform the daily and periodic mainte‐

nance, during the fuel refuelling, the repairing and the clearing. Don’t smoke
when are working around the batery and refuelling of fuel.

• Refill of fuel after the engine is completly cooled.
• Even clean the leakage of fuel and lubrificant.

Control of the fuel level and refuel

1. Check the fuel level after have open the engine cover looking the visual level on

the tank.

2. If the fuel is not enough, refuel without exeed the upper limit of the fuel tank.
3. The fuel cap for refill the fuel tank, is under the engine cover ( see paragrafh 1.3)

and it’s indicate with a sticker reported below.

During the refuel of fuel utilize a filter for avoid that dirty and sand damage the
injection pump.

OMPACT DUMPER

HS701 ‐ H

INOWA

MUHS70120615

IMPORTANTE

IMPORTANT

PERICOLO

DANGER

ATTENZIONE

CAUTION

ESEL

Содержание HS701













































































































Результаты поиска

Содержание HS701

Отзывы:

Бренды по названию

Популярные бренды

Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Результаты поиска

Содержание HS701

Отзывы:

Бренды по названию

Популярные бренды