manualshive.com logo in svg

Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Поделиться
Скачать
Hinowa HS701 Скачать руководство пользователя страница 61

‐

Engage the ramps with the front of the machine.

‐

In the proximity of the tilt variation between the ramps and the trailer/truck
bed, drive very slowly in order to avoid jolting.

‐

Drive very slowly on the ramps by adjusting the speed lever. Drive at MINI‐
MUM speed during tilt variations. Keep a constant speed. Avoid abrupt star‐
ting and braking.
Before engaging the ramps, make sure that each track is COMPLETELY
within the plane of each ramp. While engaging the ramps, drive the machine
keeping a PERFECTLY straight trajectory, making sure at ALL times that
each track is COMPLETELY within the plane of each ramp.

‐

Place the machine so that no parts of it protrude from the truck/trailer shape.

For descending, proceed following the above indications and instructions.

If the ramp inclination is excessive, adjust it or, if this is not possible, use longer
ramps.

5.10 PRECAUTIONS WHEN TRANSPORTING THE MACHINE

T

RANSPORT CONFIGURATION

When transporting the dumper on a truck, trailer or other vehicle, make sure that
the machine is configured as follows:
•  Skip completely empty. Unfastened loads in the skip could move during tran‐

sport or fall out of it. Any load inside the skip raises the center of gravity of the
machine, impairing its stability

.

•  Skip and bucket completely closed.

59

C

OMPACT DUMPER

HS701 ‐ H

INOWA

MUHS70120615

IMPORTANTE

IMPORTANTE

IMPORTANTE

IMPORTANT

IMPORTANT

IMPORTANT

IMPORTANTE

IMPORTANT

Содержание HS701













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды