Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Страница: 60 / 108

C
OMPACT DUMPER
HS701 ‐ H
INOWA
58
MUHS70120615
During the loading/unloading operations from a truck or trailer through the use of
ramps, please follow the indications below:
‐
Make sure that the truck or trailer has adequate capacity to transport the dum‐
per. Please refer to the weight as indicated in the paragraph “Technical data”
herein.
‐ Park the truck or trailer on flat ground.
‐ Choose ramps of adequate length to ensure a maximum angle of inclination
with respect to the ground lower than or equal to 12 degrees . As a general rule,
if the truck/trailer ramps rest on a surface with no slope variations, the above
requirement is met when the ratio between the length of the ramps and the
height of truck/trailer bed from the ground is higher than or equal to 4,8.
‐ Make sure that the ramps are equipped with side containment edge having
size and shape as indicated by the diagram below:
‐ Make sure that the ramps are of adequate capacity to support the machine.
Please refer to the weight as indicated in the paragraph “Technical data”
herein.
‐ Make sure that the ramps and truck/trailer bed are clear of debris or slippery
material.
‐ The truck/trailer must be stationary with the wheels blocked, the parking
brake engaged, the engine turned off, without the ignition key inserted in the
control panel and the bed in flat position.
‐ The ramps should be firmly supported by and fixed to the structure of the
truck/trailer bed. Make sure that the ramps are effectively attached to the
truck/trailer before using them.
‐ The highest point of the tracks must be on the same level of the truck/trailer
bed.
No steps shall be present between the ramp and the truck/trailer bed.
‐ Extend the dumper undercarriage before engaging the ramps (only for exten‐
dable undercarriage version).
‐ Adjust the distance between the ramps according to the tracks – Always
unload the dumper before engaging the ramps.
Containment
edge
Drive plane
of the tracks