Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Страница: 66 / 108

6 MAINTENANCE
6.1 SAFETY INSTRUCTIONS TO CARRY OUT MAINTENANCE WORK
• Spare parts must comply with the technical specifications established by the
manufacturer. This is ensured by the use of original spare parts.
• It is extremely DANGEROUS to make mistakes. Before carrying out repairs or
greasing read carefully the user’s and maintenance manual.
• Handle each part with the utmost attention. Keep hands and fingers away from
slots, gearing and the likes. Always use approved protection equipment, such
as safety goggles, rubber gloves and safety shoes.
• When working on the electrical system, always wear safety goggles and remo‐
ve rings, wristwatches and any other metallic jewels. As a general prescription,
do not use fuel to clean parts.
• Interventions on the auxiliary electrical system must be carried out exclusively
by our Customer Service in order to ensure compliance with current laws and
regulations (EN 60204 and national laws).
• Always disconnect the batteries using the appropriate battery switch (ref. para‐
graph 5.2), before any intervention on the electrical system.
• Hydraulic pipes must be laid and installed in a workmanlike manner.
• Tampering with the hydraulic circuit may lead to severe DANGER in using the
dumper.
• Do not dispose of lubricants in the environment. Collect and dispose of these
products in accordance with laws and regulations in force in each single coun‐
try.
• Check the machine at least once a day for any visible damages (corrosion,
structural integrity, welding). Any changes emerged (including functional
changes) must be immediately reported to the officer in charge. Stop down and
lock the machine immediately and proceed with more accurate checks.
• A fluid leaking under pressure may penetrate the skin. Always relieve pressure
before disconnecting the hydraulic pipes and tighten the fittings before pressu‐
rizing. Keep hands and body away from pinholes and nozzles from which
liquid is leaking at high pressure. Use a piece of carton or paper to identify
leaks.
• Heavy parts must be lifted through the use of a lifting device of adequate capa‐
city.
C
OMPACT DUMPER
HS701 ‐ H
INOWA
64
MUHS70120615