Hinowa HS701, Руководство пользователя - Безопасность и обслуживание машины

Страница: 77 / 108

6.4.1 H
YDRAULIC OIL
• Check
To check the hydraulic oil level, place the machine on a flat surface, with
undercarriage (if applicable) and skip closed skip support in lower position
and bucket lowered on the terrain, and check that the oil level is about half of
visual level
A .
Otherwise, add the necessary oil through filler cap B .
• Replacement
To replace the hydraulic oil, please proceed as follows:
‐ open the skip and lock it using its dedicate locker;
‐ check the skip support in lower position.
‐ position the bucket on the terrain.
‐ turn off the engine;
Unscrew a turn the filler cap and wait untill the air under pressure are comple‐
tly out from the tank.
‐ disconect the upper pipe between the cylinder and the distributor near the
cylinder;
‐ start the engine at the minimum and moving slowly the lever in order
to close the dumper, put out in the appropriate container all the oil;
‐ turn off the engine;
‐ reconnect the pipe and fill the tank through filler cap.
Avoid mixing oils by different manufactures.
75
C
OMPACT DUMPER
HS701 ‐ H
INOWA
MUHS70120615
IMPORTANTE
IMPORTANT
B