HIMA HIMatrix F3 AIO 8/4 01, Руководство пользователя

Страница: 36 / 56

4 Start-up F3 AIO 8/4 01
Page 36 of 56 HI 800 161 E Rev. 2.00
4.3.3 Analog Outputs F3 AIO 8/4 01
The following tables present the statuses and parameters for the output module (AO 4) in the
same order as given in the Hardware Editor.
4.3.3.1 Tab
Module
The
Module
tab contains the following system parameters:
System parameter Data
type R/W Description
AO.Error Code WORD R Error codes for all analog outputs
Coding Description
0x0001 Module fault
0x0002 Safety switch 1 faulty
0x0004 Safety switch 2 faulty
0x0008 FTT test of test pattern faulty
0x0010 FTT test: Error while checking coefficients
0x0400 FTT test: 1st temperature threshold exceeded
0x0800 FTT test: 2nd temperature threshold exceeded
0x2000 Status of safety switches
0x4000 Active shutdown via watchdog faulty
Module Error Code WORD R Module error code
Coding Description
0x0000 I/O processing, if required with errors, see
other error codes
0x0001 No I/O processing (CPU not in RUN)
0x0002 No I/O processing during the booting test
0x0004 Manufacturer interface operating
0x0010 No I/O processing: invalid configuration
0x0020 No I/O processing: fault rate exceeded
0x0040/
0x0080 No I/O processing: configured module not
plugged in
Module SRS UDINT R Slot number (System Rack Slot)
Module Type UINT R Type of module, target value: 0x0069 [105
dec
]
Table 31: SILworX - System Parameters for Analog Outputs,
Module
Tab