HIMA HIMatrix F3 AIO 8/4 01, Руководство пользователя

Страница: 22 / 56

3 Product Description F3 AIO 8/4 01
Page 22 of 56 HI 800 161 E Rev. 2.00
3.5.1.3 Communication LEDs
All RJ-45 connectors are provided with a small green and a yellow LEDs. The LEDs signal the
following states:
LED Status Description
On Full duplex operation
Blinking Collision
Green
Off Half duplex operation, no collision
On Connection available
Blinking Interface activity
Yellow
Off No connection available
Table 13: Ethernet Indicators
3.5.2 Communication
The remote I/O communicates with the associated controller via safe
ethernet
.
3.5.2.1 Connections for Ethernet Communication
Property Description
Port 2 x RJ-45
Transfer standard 10BASE-T/100BASE-Tx, half and full duplex
Auto negotiation Yes
Auto crossover Yes
IP address Freely configurable
1)
Subnet mask Freely configurable
1)
Supported protocols
 Safety-related: safe
ethernet
 Standard protocols: Programming and debugging tool
(PADT), SNTP
1)
The general rules for assigning IP address and subnet masks must be adhered to.
Table 14: Ethernet Interfaces Properties
The two RJ-45 connectors with integrated LEDs are located on the bottom left-hand side of the
housing. Refer to Chapter 3.5.1.3 for a description of the LEDs' function.
The connection parameters are read based on the MAC address (media access control
address) defined during manufacturing.
The MAC address for the remote I/O is specified on a label located above the two RJ-45
connectors (1 and 2).
Figure 6: Sample MAC Address Label
The remote I/O is equipped with an integrated switch for Ethernet communication. For further
information on the integrated switch and safe
ethernet
, refer to Chapter
Communication
of the
system manual for compact systems (HI 800 141 E).