Annex
138/145
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM36EN | Revision 36 | English | 2012-10 | Released | Public
© Hilscher, 2008-2012
11.7 Glossary
10-Base T
Standard for communication on Ethernet over twisted pair lines with RJ45
connectors and a
Baud_rate
of 10 MBit/s (according to the IEEE 802.3
specification).
100-Base TX
Standard for communication on Ethernet over unshielded twisted pair lines
with RJ45 connectors and a baud rate of 100 MBit/s according to the IEEE
802. specification
Auto-Crossover
Auto-Crossover is a feature of an interface: An interface with Auto-
Crossover capability will automatically detect and correct if the data lines
have been exchanged vice versa.
Auto-Negotiation
Auto-Negotiation is a feature of an interface: An interface with Auto-
Negotiation will automatically determine a set of correct communication
parameters.
Baud rate
Data transmission speed of a communication channel or interface.
Boot loader
Program loading the firmware into the memory of a device in order to be
executed.
cifX
C
ommunication
I
nter
F
ace based on net
X
cifX TCP/IP Server
cifX TCP Server.exe
Program for the remote diagnostics via Ethernet.
Name:
cifX TCP/IP Server for SYCON.net
User Interface:
TCP/IP Server for cifX
Coil
A coil is a single bit in the memory that can be accessed using Modbus:
read or write access with FC 1, 5, 15. Depending on the used Modbus
function code a single coil or several coils lying in succession can be
accessed.
CSP
electronic device data sheet, required for each CC-Link device
