hilscher 1912.102, Руководство пользователя

Страница: 70 / 146

Configuration 70/146
8.3.8.4 Pairing
On the Pairing tab you can pair a wireless device (or a wireless bridge) that
has not yet been scanned, i.e. whose unique ID is not yet known. Via the
Pairing by button option unknown devices can be paired and replace the
Unique ID.
Set port mode
Ø
Select the wireless IO-Link port in the left column of the netFIELD
Wireless Web Server.
Ø
Open the Settings tab.
Ø Set the Port mode, as described in section Port settings [ } page 65] or
in section Port settings for commissioning [
}
page 85].
Switch to Pairing tab
Ø
Open the Pairing tab.
ð The Pairing tab appears as follows:
Figure 30: Pairing tab after port mode was set correctly
Pairing by button
Ø
Now, press the button on the wireless device or on the bridge.
Ø
Keep the button pressed at least for 5 seconds.
Ø Then, click Pair by Button .
Ø
Keep the button (on the device or bridge) pressed at least for another
three seconds.
Ø
Wait for the message
Pairing successfully finished!
Pairing by Unique ID
Ø
Make sure that you use the correct unique ID for the respective device.
To do so, use the wireless device with the UniqueID that has been
recognized with the last Scan or Pairing by button procedure. You also
can add the correct UniqueID manually in the Settings > Miscellaneous
tab (see section
Port settings [
}
page 65]).
Ø
Then, click Pair by UniqueID .
NFD-3090-PNS-IOLM\W | Hardware, installation and commissioning
DOC201101UM03EN | Revision 3 | English | 2022-02 | Released | Public © Hilscher 2020 - 2022