HIKVISION Pyronix EURO 46 V10, Руководство по программированию

Страница: 22 / 64

22
EURO 46 V10 Programming Manual
Codes And Users?
Five Digit PINs?
Set this option to ‘Yes’ to allow the use of 5 digit and 6 digit codes (This will disable codes below 5
digits in length). Set this to ‘No’ if you would prefer to use codes below 5 digits in length.
Delete Users And Fobs?
This function deletes all the user codes (or tags/fobs assigned to a user) from the system.
Change Duress/Guard Codes?
This function changes the Engineer code, the Master Manager code and adds/changes/deletes any
Duress or Guard codes.
PLEASE NOTE: User codes, proximity tags and key fobs can only be changed in the Master
Manager Menu, however users can change their own codes (if a user code has been set up).
Duress Code Types
Duress Code: If the Control Panel is unset using a ‘Duress Code’, a silent ‘Duress’ or ‘Hold Up’ signal
is sent.
PLEASE NOTE: ACPO policy prevents use of Duress codes for police call purposes.
Guard: A ‘Guard Code’ can be used to unset the control panel only after the ‘Guard Code Alarm’ time
has expired. The code will set a system and an output type (00058 Guard Code) will activate when
this code is used.
Dial Out: A dial code is used to force the panel to dial the UDL software while in ‘Day Mode’
Change Master Manager Code
The Master Manager code can be 4, 5 or 6 digits long, or can be assigned to a proximity tag. It may
also have the following functions:
User Areas: (01ABCD) The areas to which the code applies.
User Set Options: [0] Unset/Set. [1] Unset Only. [2] Set Only. [3] None (menu access only).
Flexi Set: If enabled the default area the device is assigned to will set. If disabled the default area will
be shown on the display and from here other areas can be selected.
Wards/Access: This will only be displayed if an Entry Control or Access Control reader is installed
on the system. If the address of the Entry Control or Access Control device is entered here, then the
code will be assigned to that reader only.
User Name: Enter a name for the user or group that use this code.
Change Engineer Code
The Engineer code can be 4, 5 or 6 digits long.
Change Codes Programming
1. Press
b
or

to scroll to ‘CODES AND USERS?’.
Press  .
2. ‘5 digit PINS?’ will now be displayed. Press 1 for ‘Yes’
or

for ‘No’ then press

to move on.
CODES AND USERS?
5 digit PINs?
Yes [1]