HIKVISION Pyronix EURO 46 V10, Руководство по программированию

Страница: 19 / 64

19
EURO 46 V10 Programming Manual
12. ‘Enter Name’ will be displayed. Enter the name of the
keypad and press  .
13. ‘Enter Location’ will be displayed. Enter the location of
the keypad and press  .
14. Press
b
or
d
to select another device address
to program (1-9) or press the

key to return to the
Engineer Menu.
Programming Wireless Arming Stations: Assign Keypads/Readers
1. Press
b
or

to scroll to ‘ASSIGN KEYPADS/
READERS’. Press  .
2. Press
b
or
d
to select from addresses 6 - 9. Press
 .
3. ‘Type’ will be fixed as [3] (Arming Station) Press

4. ‘Options?’ will be displayed. Press

.
5. ‘Tag Reader Enable’ will be displayed. This option enables
or disables the Tag Reader on the wireless Arming Station.
Disabling it will conserve battery power. Select then - Press

.
6. ‘Auto Wakeup’ will be displayed. This option wakes the tag
reader from sleep mode during the entry process/walking the
entry route. Select to enable or disable then - Press
 .
7. ‘Supervision’ will be displayed. Radio supervision & battery
monitoring improve security, but can be disabled to save
battery power. Select to enable or disable and then - Press

.
8. ‘Back Light’ will be displayed. When enabled, the back-
light will illuminate for 5 seconds after any key press.
Select to enable or disable and then - Press
 .
9. ‘Entry/Exit Sound’ will be displayed. This enables or disables
the entry and exit sounds from the small piezo in the Arming
Station. Select to enable or disable, then - Press

.
Enter Name
Device 01
Enter Location
_
ASSIGN KEYPADS /
READERS?
Options?
Arming Address 1
Station 01 [6]
Tag Read Enable
No [0]
Supervision
No [0]
Type
Arming Stat [3]
Auto Wakeup
No [0]
Backlight
No [0]
Entry/Exit Sound
No [0]