HIKVISION DS-K1T341C Series, Руководство пользователя

Страница: 195 / 218

The client software gives an audible warning when the event is triggered. You can select
alarm sound for the audible warning.
Note
For details about setting the alarm sound, refer to Set Alarm Sound in the user manual of
the client software.
Send Email
Send an email notification about the event to one or more receivers.
For details about setting email parameters, refer to Set Email Parameters in the user
manual of the client software.
2) Click OK.
5. Enable the event so that when the event is detected, event will be sent to the client and the
linkage actions will be triggered.
6. Optional: Click Copy to to copy the event settings to other access control device, alarm input,
door, or card reader.
9.8.2 Configure Device Actions for Access Event
You can set the access control device's linkage actions for the access control device's triggered
event. When the event is triggered, it can trigger the alarm output, host buzzer, and other actions
on the same device.
Steps
Note
It should be supported by the device.
1. Click Access Control → Linkage Configuration .
2. Select the access control device from the list on the left.
3. Click Add button to add a new linkage.
4. Select the event source as Event Linkage.
5. select the event type and detailed event to set the linkage.
6. In the Linkage Target area, set the property target to enable this action.
Buzzer on Controller
The audible warning of access control device will be triggered.
Capture
The real-time capture will be triggered.
Access Point
The door status of open, close, remain open, and remain close will be triggered.
DS-K1T341C Series Face Recognition Terminal User Manual
179