HIKVISION DS-K1T341C Series, Руководство пользователя

Страница: 130 / 218

Note
If the peripheral card reader supports presenting EM card, the function is also supported to
enable/disable the EM card function.
Enable DESFire Card
The device can read the data from DESFire card when enabling the DESFire card function.
DESFire Card Read Content
After enable the DESFire card content reading function, the device can read the DESFire card
content.
Enable FeliCa Card
The device can read the data from FeliCa card when enabling the FeliCa card function.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → General → Card Authentication Settings .
Select a card authentication mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
Configure Authentication Result Text
Steps
1. Go to Configuration → General → Authentication Result Text .
2. Enable Customize Authentication Result Text.
3. Enter custom texts.
4. Click Save.
8.5.19 Access Control Settings
Set Door Parameters
Click Configuration → Access Control → Door Parameters .
DS-K1T341C Series Face Recognition Terminal User Manual
114