HIKVISION DS-K1T341C Series, Руководство пользователя

Страница: 161 / 218

Extended Door Open Time
Use this function for persons with reduced mobility. When accessing the door, the person will
have more time than others to pass through doors.
For details about setting the door's open duration, refer to Configure Parameters for Door/
Elevator .
Add to Blocklist
Add the person to the blocklist and when the person tries to access doors/floors, an event
will be triggered and sent to the client to notify the security personnel.
Mark as Visitor
If the person is a visitor, you should set the her/his valid times for visit.
Note
The valid times for visit is between 1 and 100. You can also check No Limit, then there are no
limited times for the visitor to access doors/floors.
Device Operator
For person with device operator role, he/she is authorized to operate on the access control
devices.
Note
The Super User, Extended Door Open Time, Add to Blocklist, and Mark as Visitor functions
cannot be enabled concurrently. For example, if one person is set as super user, you cannot
enable extended door open time for her/him, add her/him to the blocklist, or set her/him as
visitor.
6. Confirm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and continue to add other persons.
9.4.10 Customize Person Information
You can customize the person properties which are not pre-defined in the client according to actual
needs, e.g., place of birth. After customizing, when add a person, you can enter the custom
information to make the person information complete.
Steps
1. Enter Person module.
2. Set the fields of custom information.
1) Click Custom Property.
2) Click Add to add a new property.
3) Enter the property name.
4) Click OK.
3. Set the custom information when adding a person.
DS-K1T341C Series Face Recognition Terminal User Manual
145