HIKVISION DS-K1T341C Series, Руководство пользователя

Страница: 147 / 218

Note
●
This function should be supported by the device.
●
You can log into the device to get the certificate file by web browser.
7. Check Synchronize Time to synchronize the device time with the PC running the client after
adding the device to the client.
8. Optional: Check Import to Group to create a group by the device name.
9. Finish adding the device.
-
Click Add to add the device and back to the device list page.
-
Click Add and New to save the settings and continue to add other device.
10. Optional: Perform the following operation(s).
Remote
Configuration
Click on Operation column to set remote configuration of the
corresponding device.
Note
For detail operation steps for the remote configuration, see the user
manual of the device.
Device Status Click on Operation column to view device status, including
cameras, recording status, signal status, hardware status, etc.
Edit Device
Information
Click on Operation column to edit the device information, such as
IP address, user name, and password.
Check Online User Click on Operation column to check the online users who access
the device, such as user name, user type, user's IP address, and
login time.
Refresh Click on Operation column to get the latest device information.
Delete Device Select one or multiple devices and click Delete to delete the
selected device(s) from the client.
Add Device by EHome Account
For access control devices supports EHome 5.0 protocol, you can add them to the client by EHome
protocol after entering device ID and key, if you have configured their server addresses, port No.,
and device IDs.
Before You Start
Make sure the devices have connected to the network properly.
Steps
1. Enter Device Management module.
The added devices are displayed on the right panel.
2. Click Add to open the Add window.
DS-K1T341C Series Face Recognition Terminal User Manual
131