HIKVISION DS-K1T341C Series, Руководство пользователя

Страница: 120 / 218

Steps
1. Click Configuration → Network → Advanced → Platform Access to enter the settings page.
2. Check the checkbox of Enable to enable the function.
3. Select the Platform Access Mode.
Note
Hik-Connect is an application for mobile devices. With the App, you can view live image of the
device, receive alarm notification and so on.
4. Create a Stream Encryption/Encryption Key for the device.
Note
6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a
combination of no less than 8 letters or numbers.
5. Click Save to enable the settings.
Configure HTTP Listening
The device can send alarm information to the destination IP or host via HTTP protocol.
Before You Start
The destination IP or host name should support the HTTP protocol to receive the alarm
information.
Note
The function should be supported by the device.
Steps
1. Click Configuration → Network → Advanced → HTTP Listening .
2. Edit the destination IP or host name, URL and port.
3. Optional: Click Test to test whether the entered IP address or host name are valid.
4. Optional: Click Default to reset the destination IP or host name.
5. Click Save.
8.5.13 Set Video and Audio Parameters
Set the image quality, resolution, and the device volume.
Set Video Parameters
Click Configuration → Video/Audio → Video .
Set the video channel, camera name, stream type, the video type, the bitrate type, the frame rate,
the Max. bitrate, the video encoding, and I Frame Interval.
Click Save to save the settings after the configuration.
DS-K1T341C Series Face Recognition Terminal User Manual
104