HIKVISION DS-90 HUHI-F8/N Series Скачать руководство пользователя страница 98

Страница: 98 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

Figure 151, Network Settings Interface

NOTE:

One self-adaptive network interface is provided.

Select the General tab.

Configure the following parameters: NIC Type, IPv4 Address, IPv4 Gateway, MTU, DNS Server, and

Main NIC.

NOTE:

The valid MTU value is from 500 to 1500.

If a DHCP server is available, check the Enable DHCP checkbox to

obtain an IP address and other network settings automatically from

that server.

If DHCP is enabled, check Enable DNS DHCP checkbox or uncheck it

and edit the Preferred DNS Server and Alternate DNS Server.

After having configured the general settings, click the Apply button to save the settings.

16.2.

Configuring Advanced Settings

16.2.1.

Configuring PPPoE Settings

The DVR allows access by Point-to-Point Protocol over Ethernet (PPPoE).

Enter the Network Settings interface, Menu > Configuration > Network.

Select the PPPoE tab to enter the PPPoE Settings interface.

Figure 152, PPPoE Settings Interface

Содержание DS-90 HUHI-F8/N Series







































































































































































Результаты поиска

Содержание DS-90 HUHI-F8/N Series

Отзывы:

HIKVISION DS-90 HUHI-F8/N Series, Руководство пользователя, Страница: 98 / 166

Результаты поиска

Содержание DS-90 HUHI-F8/N Series

Отзывы: