HIKVISION DS-90 HUHI-F8/N Series Скачать руководство пользователя страница 109

Страница: 109 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

108

Figure 165, Network Detection Interface

Select a NIC to test network delay and packet loss.

Enter the destination address in the Destination Address text field.

Click the Test button to start testing network delay and packet loss.

16.3.2.

Exporting Network Packet

By connecting the DVR to a network, the captured network data packet can be exported to a USB

flash disk, SATA, and other local backup devices.

Enter the Network Traffic interface, Menu > Maintenance > Net Detect.

Click the Network Detection tab to enter the Network Detection interface.

Select the backup device from the Device Name drop-down list.

NOTE:

Click the Refresh button if the connected local backup device cannot

be displayed. If it fails to detect the backup device, check whether it is

compatible with the DVR. Format the backup device if the format is

incorrect.

Figure 166, Export Network Packet

Содержание DS-90 HUHI-F8/N Series







































































































































































Результаты поиска

Содержание DS-90 HUHI-F8/N Series

Отзывы:

HIKVISION DS-90 HUHI-F8/N Series, Руководство пользователя, Страница: 109 / 166

Результаты поиска

Содержание DS-90 HUHI-F8/N Series

Отзывы: