HIKVISION DS-90 HUHI-F8/N Series Скачать руководство пользователя страница 51

Страница: 51 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

Figure 65, PTZ Panel, One-Touch

Click the corresponding button to activate the one-touch park action:

•

Park (Quick Patrol):

The dome starts patrol from the predefined preset 1 to preset 32 in

order after the park time. Any undefined preset will be skipped.

•

Park (Patrol 1):

The dome starts moving according to the predefined patrol 1 path after

the park time.

•

Park (Preset 1):

The dome moves to the predefined preset 1 location after the park time.

NOTE:

The park time can be set only through the speed dome configuration

interface. The default value is 5s.

Click the button again to inactivate it.

10.2.11.

PTZ Control Panel

Enter the PTZ control panel in one of two ways:

OPTION 1:

In the PTZ Settings interface, click the PTZ button on the lower-right corner next

to the Back button.

OPTION 2:

In Live View mode, press the PTZ Control button on the front panel, or on the

remote control, or choose the PTZ Control icon

in the quick setting bar, or select the

PTZ Control option in the right-click menu.

Click the Configuration button on the control panel to enter the PTZ Settings interface.

NOTE:

In PTZ control mode, the PTZ panel will be displayed when a mouse

is connected to the device. If no mouse is connected, the

icon

appears in the lower-left corner of the window, indicating that this

camera is in PTZ control mode.

Содержание DS-90 HUHI-F8/N Series







































































































































































Результаты поиска

Содержание DS-90 HUHI-F8/N Series

Отзывы:

Похожие инструкции для DS-90 HUHI-F8/N Series

Бренды по названию

Популярные бренды

HIKVISION DS-90 HUHI-F8/N Series, Руководство пользователя

Результаты поиска

Содержание DS-90 HUHI-F8/N Series

Отзывы:

Похожие инструкции для DS-90 HUHI-F8/N Series

Бренды по названию

Популярные бренды