DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA
53
Figure 5-3
Record Parameters
2.
Set the recording parameters.
1)
Select the
Record
tab to configure.
2)
Select a camera from the camera drop-down list.
3)
View the Camera Resolution.
When TurboHD, AHD, or HD-CVI input is connected, you can view information including input signal
type, resolution, and frame rate (e.g., 1080P30). When CVBS input is connected, you can view
information such as NTSC or PAL.
4)
Configure the following parameters for the
Main Stream
(Continuous)
and the
Main Stream (Event)
.
•
Stream Type
: Set the stream type to be Video or Video & Audio.
•
Resolution
: Set recording resolution.
Analog signal inputs (TurboHD, AHD, HD-CVI, CVBS) and IP signal input can be recognized and
connected automatically.
If the configured encoding resolution conflicts with the front-end camera resolution, the encoding
parameters will adjust automatically to match the front-end camera. E.g., if the resolution of the
front-end camera is 720p, the main stream encoding resolution will adjust to 720p automatically.
•
Bitrate Type:
Set the bitrate type to be Variable or Constant.
•
Video Quality
: Set the video quality of recording, with six levels configurable.
Stream Type, Resolution, Bitrate Type, and Video Quality are not configurable for the IP Camera Main
Stream (Event).
