DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA
115
4.
Set the VCA detection type to
Face Detection
.
5.
Click
Set
to enter the Face Detection Settings interface. Configure the trigger channel, arming
schedule, linkage action, and PTZ linking for the face detection alarm. Refer to
8.3
Setting Sensor
Alarms
for detailed instructions.
Figure 9-2
PTZ Linking
6.
Click
Rule Settings
to set the face detection rules. You can drag the slider to set the detection
sensitivity.
•
Sensitivity:
Range [1-5]. The higher the value, the more easily the face is be detected.
Figure 9-3
Set Face Detection Sensitivity
7.
Click
Apply
to activate the settings.
9.2 Vehicle Detection
Purpose
Vehicle Detection is available for road traffic monitoring. In Vehicle Detection, a passing vehicle can be
detected, and the picture of its license plate can be captured. You can send an alarm signal to notify the
surveillance center and upload the captured picture to an FTP server.
1.
Go to
Menu > Camera Setup > VCA
.
2.
Select the camera for which to configure the VCA.
3.
Check the
Save VCA Picture
checkbox to save the captured VCA detection pictures.
4.
Set the VCA detection type to
Vehicle Detection
.
5.
Check the
Enable
checkbox to enable this function.
