DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA
27
STRONG PASSWORD RECOMMENDED
– We highly recommend that you create a strong password of your
own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password monthly or weekly can better protect
your product.
4.
Click
OK
to finish activating the IP camera. The camera security status will change to
Active
.
2.7.2 Adding an Online IP Camera
Purpose
Before you can get a live view or record the video, add the IP cameras to the connection list of the device.
Before You Start
Ensure the network connection is valid. See
Chapter
11 Network Settings.
OPTION 1:
1.
Select
Add IP Camera
from the right-click menu in live view or go to
Menu> Camera> IP Camera
.
Figure 2-25
IP Camera Management Interface
2.
Online cameras in the same network segment will be detected and displayed in the camera list.
3.
Select an IP camera from the list and click
to add the camera (with the same admin password
as the DVR), or click
One-touch Adding
to add all cameras (with same admin password) on the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the
admin password of the camera is the same with the DVR’s.
4.
(Optional) Check the
Enable H.265
checkbox (For Initial Access) for the connected IP camera
supporting H.265. Then, the IP camera will be encoded with H.265.
5.
(For encoders with multiple channels only) check the checkbox of Channel Port in the pop-up
window, as shown in the following figure, and click
OK
to add multiple channels.
